Buy Dancesafe LSD testing kit | buy Ehrlich spot test kit

The Buy Dancesafe LSD testing kit consists of one bottle of Ehrlich’s reagent. Ehrlich’s turns purple in the presence of LSD, helping rule out 25i-NBOMe, a highly toxic and extremely dangerous drug often misrepresented as LSD. INCLUDES A FREE FENTANYL TESTING STRIP! Contains enough reagent for approximately 50 tests. buy Ehrlich spot test kit

WHAT ARE REAGENTS?

Reagents are chemicals that change color when they come into contact with certain drugs, enabling you to detect their presence in a sample. Reagents cannot, however, detect every drug, nor can they tell you how pure or potent your drugs are. Even if you get the expected color reactions for the drug you want, there could still be one or more other drugs present. This is because:

• Not all drugs change color with reagents.
• Darker colors may overshadow lighter colors.
• A very tiny quantity of a drug may not produce a visible color change.

Despite these limitations, reagent testing is useful for identifying the presence of specific drugs, and——most importantly——for determining whether your sample does not contain the drug you want.

REAGENTS CAN

• Detect the presence of certain drugs
• Inform your decision about whether or not to consume a drug

REAGENTS CANNOT

• Tell you how potent your drugs are
• Tell you if your drugs are pure

HOW TO USE REAGENTS

1 Place a tiny amount of your drug onto a white, ceramic plate. Make it about the size of a pinhead. We will refer to this as the “sample” of your drug. For pressed pills, use a sharp knife to scrape the powder off the side. For blotter paper, cut off a tiny piece of the corner. For liquid drugs, place one drop onto the plate.

2 Carefully place one drop of reagent onto the sample. Do not let the bottle touch the sample or you will contaminate the entire bottle of reagent. If you are using a 2-bottle reagent such as Simon’s, Folin, or Morris, place one drop from bottle A and then one drop from bottle B onto the same sample.

3 Observe the color change and compare with the enclosed color chart. Most reagents will change color within twenty seconds.

• Ehrlich’s reagent can take up to 5 minutes.
• Morris reagent needs to be stirred (use a toothpick or the sharp point of a knife).

The final color will appear after stirring for a full 30 seconds.

4 Repeat. Most drugs need to be tested with more than one reagent. When using multiple reagents, put the cap back on the first reagent and repeat the process with the next reagent using a new sample from the same batch that you’re testing.

5 Clean up. Use baking soda to neutralize 5 the chemicals, then wash the plate with soap and water.buy Ehrlich spot test kit

USE INSTRUCTIONS

Place a small sample (2-5mg) of the substance you want to analyze in the provided plastic tube. If preferred, the test can be performed on a white ceramic surface for clearer results (e.g. kitchen plate). Add a drop of Smplest Ehrlich reagent to the sample and expect it to change colors.

The ehrlich test confirms the presence of indole groups in a sample. LSD, DMT (ayahuasca), psilocybin and psilocin (mushrooms), AMT, 5-MeO-DMT, 5-MeO-DIPT, 5-MEO-MIPT, 5-MEO-AMT, 4-ACO-DMT all contain indole groups in their respective molecules and will therefore react with this reagent. In order to distinguish among the above mentioned indolic molecules, we highly recommend testing your sample with the Hofmann reagent as well. This will also serve as a reliable validation of the results obtained with the Ehrlich reagent. Ehrlich spot test kit

Upon reaction, the sample will gradually turn purple/magenta (see legend). The reaction can take a while to take place (up to 3 minutes), especially if the substance is impregnated in blotter paper. Ehrlich spot test kit

When finished, clean all material thoroughly with plenty of water. The entire protocol takes approximately 5 minutes. Store at cold temperature, preferably in the freezer for longer shelf life (up to 12 months). Dancesafe LSD testing kit for sale